Author: Renaud Bédard

Update (Oct. 26th) : Better interpolation = better shaping, and the simpler “inscribed square” method.
Update (Nov. 4th) : Exact and customizable solution!

The input values of thumbsticks on an Xbox 360 controller are always contained inside the unit circle, a disk centered on the origin and whose radius is 1. This is usually fine, because you want to interpret the values as a vector inside that circle… but if you want to provide an analog version of a D-Pad, for instance to control a character in a 2D platformer, then you’ll find that your character will never reach maximum horizontal speed unless you hit the (1, 0) or (-1, 0) vectors, exactly right or left. Anything tilted up or down will give a fractional speed, and if you hit a diagonal corner, you’ll end up with ±√½.

So what if the analog stick was a square area instead, such that the entire circumference has a least one component maxed out, like the contour of a square?
It may seem like a simple thing to do, but it proved to be a lot of trouble, and in the end I chose to use an approximation (nope, it worked out in the end!)… but here’s how I researched the problem.

Attempt #1 : Wrong way around

I first googled “Mapping circle to square“, and ended up on a blog entry that describes the inverse transform. Fine, I’ll just invert it, isolate the x and y variables as a function of x’ and y’… But that proved to be a problem.

Wolfram|Alpha doesn’t know what to do with it, and after making it more manageable (for x, for y), it gives 4 different answers that seem to work only for specific intervals, but doesn’t say which…
I tried doing it by hand and was stuck early on, because I suck at this.

And since I don’t have access to (nor know how to use) proper nonlinear equation solvers, I decided to give up.

Attempt #2 : Projections

By googling some more and varying search terms, I stumbled upon a cool flicker image titled “Conformal Transformation: from Circle to Square“. That’s exactly what I need!
But alas, it involves something called elliptic integrals and this also goes beyond my math understanding, or the amount of effort I was willing to put in this. The description also links to the Peirce quincuncial projection, which maps a sphere to a square, but the math also goes above my head (complex numbers arithmetic and again, elliptic integrals).

At this point I realized that what I was trying to do was not trivial.

Attempt #3 : Intuition serves best

So I just went back what I usually do : analyze the problem, determine what I expect as a basic solution, and work my way there.

• Problem : The smallest horizontal component I end up with is ±√½, or ±~0.707, when the θ angle is π/4, 3π/4, 5π/4 or 7π/4.
• Solution : Scale this to ±1, so by a factor of √2.

The scale for angles close to diagonals should fall down to identity (1) when it reaches a cardinal direction, though I’m not sure about the interpolation curve… Linear should do fine?

(code removed because it’s kinda shitty)

And for additional fun and testing, here’s how evenly-spaced random points inside the unit disk stretch to the unit square using this function (points generated by my Uniform Poisson-Disk code) :

Not bad? Good enough for me.

Attempt #4 : Interpolation and variations

I then tried different interpolation/easing methods for the scaling factor, and tried raigan’s idea of just scaling and clamping linearly the circle to a square, here’s what it looks like!

I tried sine, quadratic and circular ease in/out/in-out from my easing functions library, and quadratic ease-in was the most balanced. It almost shapes everything to a square, very little clamping is necessary, so I’ll keep that in.

The inscribed square method is nice and simple, but cuts off a lot of values and keeps circular gradients in its area. But in the real world, for 2D platformer input, it’s probably just fine…

Attempt #5 : Epic win

So, I decided to give another shot at this after speaking on the bus with a friend about polar coordinates and trigonometry. Turns out there is a more exact solution, and by adding a “inner roundness” parameter you can also tweak how much of the center input will remain circular, while still touching the sides for circumference values.

Here is my final C# function, then I’ll explain how it works :

static Vector2 CircleToSquare(Vector2 point)
{
	return CircleToSquare(point, 0);
}
static Vector2 CircleToSquare(Vector2 point, double innerRoundness)
{
	const float PiOverFour = MathHelper.Pi / 4;

	// Determine the theta angle
	var angle = Math.Atan2(point.Y, point.X) + MathHelper.Pi;

	Vector2 squared;
	// Scale according to which wall we're clamping to
	// X+ wall
	if (angle <= PiOverFour || angle > 7 * PiOverFour)
		squared = point * (float)(1 / Math.Cos(angle));
	// Y+ wall
	else if (angle > PiOverFour && angle <= 3 * PiOverFour)
		squared = point * (float)(1 / Math.Sin(angle));
	// X- wall
	else if (angle > 3 * PiOverFour && angle <= 5 * PiOverFour)
		squared = point * (float)(-1 / Math.Cos(angle));
	// Y- wall
	else if (angle > 5 * PiOverFour && angle <= 7 * PiOverFour)
		squared = point * (float)(-1 / Math.Sin(angle));
	else throw new InvalidOperationException("Invalid angle...?");

	// Early-out for a perfect square output
	if (innerRoundness == 0)
		return squared;

	// Find the inner-roundness scaling factor and LERP
	var length = point.Length();
	var factor = (float) Math.Pow(length, innerRoundness);
	return Vector2.Lerp(point, squared, factor);
}

There are two concepts here :

1. The scaling factor can be calculated for every theta angle without any need for interpolation. It happens to be the inverse of the sine or cosine of the angle, depending on which wall you’re trying to clamp to. This gives a perfect square all around.
2. By interpolating relatively to the length of the input vector, it’s possible to preserve the circular shape in the center and still clamp to the sides for extreme inputs.

I think I’m done with this now! Yay.

I’ve been meaning to make something like this for a long time, and I know that some engines like Xen offer a viable solution already, but I wanted to make my KISS solution that interferes with the standard XNA interface as little as possible.

It’s a pretty lengthy snippet of code, so I won’t paste it all here, but basically there’s three classes : the StateStack, ManagedRenderStates and ManagedSamplerStates.

Description

StateStack is a static extension class to the GraphicsDevice. It could be just another static class, or even a global XNA service, but since it’s going to be used in combination with the GraphicsDevice most of the time, I thought it was logical to use extensions.
You can push, pop and peek the current state, which takes and returns ManagedRenderState objects. It’s very similar to how OpenGL works with the attribute stack (glPushAttrib), except you don’t choose what you push, the entire state gets pushed/popped everytime. I didn’t think isolating states in categories was useful or natural in XNA.
The ResetState and CommitState methods are shorthands to the same methods in ManagedRenderState.

ManagedRenderState is like a wrapper over a RenderState object, such that it has the same interface : a read/write property for each render state and access to the SamplerState collection.
The difference is that it tracks changes to render states as you make them, marks properties as dirty and applies only what’s needed when you decide to Commit. The Reset method refreshes the object with the current state of the GraphicsDevice; this needs to be done at the beginning of every draw call, or everytime you think the state has been tampered with.

ManagedSamplerState does the same thing but for sampler states : addressing, filtering, etc. You don’t call Reset or Commit on it directly, it gets done automatically by its host ManagedRenderState.

I added blending mode and texture filtering helper methods to both State classes, because I end up using that a lot… and with proper state management, you don’t have to worry about redundant assignments! So you can be permissive and set everything you need, every time.

Usage

So what does it look like to use it?
The Game class needs to do some initialization and per-draw-call stuff first…

protected override void Initialize()
{
    GraphicsDevice.PushState();

    // Other stuff
    base.Initialize();
}

protected override void Draw(GameTime gameTime)
{
    GraphicsDevice.ResetState();
    SetDefaultRenderStates();

    GraphicsDevice.Clear(Color.CornflowerBlue);
    base.Draw(gameTime);
}

void SetDefaultRenderStates()
{
    var rs = GraphicsDevice.PeekState();

    rs.DepthBufferEnable = true;
    rs.SetBlendingMode(BlendingMode.Alphablending);

    rs.SamplerStates[0].SetFiltering(FilteringMode.Anisotropic);
    rs.SamplerStates[0].AddressU = rs.SamplerStates[0].AddressV = TextureAddressMode.Wrap;

    GraphicsDevice.CommitState();
}

Then to use the state stack, you don’t ever touch the GraphicsDevice.RenderState object : always use the Managed equivalent.

// Push a copy of the state on the stack
var rs = GraphicsDevice.PushState();

// Always-on-top, and don't disturb the depth buffer, and no culling
rs.DepthBufferFunction = CompareFunction.Always;
rs.DepthBufferWriteEnable = false;
rs.CullMode = CullMode.None;

// Commit changes
GraphicsDevice.CommitState();

// Draw some stuff
Draw();

// Pop back to the last state
GraphicsDevice.PopState();
// We are now back to the last state

Download & Conclusion

I think it makes a lot of sense to stack states in a component system, because each component can push its own local state and work with it, and just dispose it afterwards. Add this to dirty-checking to remove almost all redundant state changes, and you’ve got a very usable system!

The next step is batching draw calls to keep calls that use the same RenderStates together… in my system, this is left to the user’s discretion. Kevin Gadd presented a way of doing this (and many other things including threaded rendering) on his blog.

Another rather important note : ManagedRenderState contains a MaxSamplers constant that you can tweak depending on the number of sampler states you know you’ll use. Leaving it at 16 will make update/reset/refresh operations kind of slow… not sure yet if it’s noticeable.

And because of the immense amount of copy-paste that’s been needed to produce these classes, I can’t promise that it doesn’t have a typo or two… I haven’t tested every single state. But up to now, it works great, and I’ll update it if needed.

StateStack.cs (2 kb – C# class)
ManagedRenderState.cs (30 kb – C# class)
ManagedSamplerState.cs (7 kb – C# class)

Bonuses in the code files : a method to unpack a packed color from uint to Color, and a simplistic object Pool implementation (to eliminate garbage when stacking up states).

Hope you find it useful!